VP000 12V 8mm Semi Automatic Twin Tank Conversion Kit

COMPONENTS

1 x 3 Way Tri Colour switch.,1 x 2m wiring loom (including in line fuse),
with semi-automatic switch over to veg oil and premature switch over prevention..Vegetable oil can not get into the diesel tank in our systems (thus avoiding cold start problems and pump damage ).

1 x Flat plate heat exchanger. 1 x Coil heat exchanger (for fuel filter).

2 x heated (8 watt) 3 way solenoid (fuel change over) valves.

22litre plastic fuel tank with inbuilt sight guage.500x8mm rubber and 7.5mx8mm translucent fuel hoses, 8 Reinforcement ferrules . In line fuel filter. 1m x13mm heater hose,

2 x hose adaptors either19x13mm,16x13mm or 13x13mm and 18 various size hose clips.

Tank strap fixing screws and washers.500x25x3mm aluminium bar for mounts.

Priced from £250 without Coil heat exchanger, £270 with, + £15 p&p

Fitting from £275

 

SUITABILITY

Suitable for Vehicles that return more than 20 mpg , eg. small cars and light vans (under 3litre), which have 8mm inside diameter fuel lines. Engines that are either Pre chamber or direct injection (Tdi) with distributor type/inline injection pumps. Ideally suited to Bosch, Diesel kiki, Nippon Denso or Zexel injection pumps.



 
VP001 12V 8mm Automatic Twin Tank Conversion kit.

COMPONENTS

1 x VP Solid State electronic control module (SIMPLE FIT, 2 connections).

Module Functions: Automatic switch over to veg oil and premature switch over prevention. Led light showing veg oil mode. Audible warning buzzer if left in veg oil mode when ignition turned off. Adjustable purge timer. Vegetable oil can not get into the diesel tank in our systems (thus avoiding cold start problems and pump damage ).1 x 2m wiring loom, including in line fuse.

1 x Flat plate heat exchanger. 1 x Coil heat exchanger(for fuel filter).

2 x heated (8 watt) 3 way solenoid (fuel change over) valves.

22litre plastic fuel tank with inbuilt sight guage.500x8mm rubber and 7.5mx8mm translucent fuel hoses, 8 Reinforcement ferrules . In line fuel filter. 1m x13mm heater hose,

2 x hose adaptors either19x13mm,16x13mm or 13x13mm and 18 various size hose clips.

Tank strap fixing screws and washers.500x25x3mm aluminium bar for mounts.

Priced from £370 without Coil heat exchanger, £390 with, + £15 p&p

Fitting from £275

 

SUITABILITY

Suitable for Vehicles that return more than 20 mpg , eg. small cars and light vans (under 3 litre), which have 8mm inside diameter fuel lines. Engines that are either Pre chamber or direct injection (Tdi) with distributor type/inline injection pumps. Ideally suited to Bosch, Diesel kiki, Nippon Denso or Zexel injection pumps.



 

VP002 12V 10mm Semi Automatic Twin Tank Conversion Kit

COMPONENTS

1 x 3 Way Tri Colour switch.,1 x 2m wiring loom (including in line fuse),
with semi-automatic switch over to veg oil and premature switch over prevention..Vegetable oil can not get into the diesel tank in our systems (thus avoiding cold start problems and pump damage ).

1 x Flat plate heat exchanger. 1 x Coil heat exchanger (for fuel filter).

2 x heated (8 watt) 3 way solenoid (fuel change over) valves.

22litre plastic fuel tank with inbuilt sight guage. 0.5m x10mm rubber and 7.5mx10mm translucent fuel hoses, 8 Reinforcement ferrules . In line fuel filter. 1m x13mm heater hose,

2 x hose adaptors either 19x13mm,16x13mm or 13x13mm and 18 various size hose clips.

Tank strap fixing screws and washers. 500x25x3mm aluminium bar for mounts.

Priced from £270 without Coil heat exchanger, £290 with, + £15 p&p

Fitting from £275

 

SUITABILITY

Suitable for Vehicles that return more than 20 mpg , eg. small cars and light vans (under 3litre), which have 8mm inside diameter fuel lines. Engines that are either Pre chamber or direct injection (Tdi) with distributor type/inline injection pumps. Ideally suited to Bosch, Diesel kiki, Nippon Denso or Zexel injection pumps.



 

VP003 12V 10mm Automatic Twin Tank Conversion kit.

COMPONENTS

1 x VP Solid State electronic control module (SIMPLE FIT, 2 connections).

Module Functions: Automatic switch over to veg oil and premature switch over prevention. Led light showing veg oil mode. Audible warning buzzer if left in veg oil mode when ignition turned off. Adjustable purge timer. Vegetable oil can not get into the diesel tank in our systems (thus avoiding cold start problems and pump damage ).1 x 2m wiring loom, including in line fuse.

1 x Flat plate heat exchanger. 1 x Coil heat exchanger(for fuel filter).

2 x heated (8 watt) 3 way solenoid (fuel change over) valves.

22litre plastic fuel tank with inbuilt sight guage. 0.5mx10mm rubber and 7.5mx10mm translucent fuel hoses, 8 Reinforcement ferrules . In line fuel filter. 1m x13mm heater hose,

2 x hose adaptors either19x13mm,16x13mm or 13x13mm and 18 various size hose clips.

Tank strap fixing screws and washers.500x25x3mm aluminium bar for mounts.

Priced from £390 without Coil heat exchanger, £410 with, + £15 p&p

Fitting from £275

 

SUITABILITY

Suitable for Vehicles that return more than 20 mpg , eg. small cars and light vans (under 3 litre), which have 8mm inside diameter fuel lines. Engines that are either Pre chamber or direct injection (Tdi) with distributor type/inline injection pumps. Ideally suited to Bosch, Diesel kiki, Nippon Denso or Zexel injection pumps.



 

VP004 12V 10mm Semi Automatic Twin Tank Conversion kit.

COMPONENTS

1 x 3 Way Tri Colour switch.,1 x 2m wiring loom (including in line fuse),
with semi-automatic switch over to veg oil and premature switch over prevention..Vegetable oil can not get into the diesel tank in our systems (thus avoiding cold start problems and pump damage ).

1 x Large Flat plate heat exchanger. 1 x Coil heat exchanger (for fuel filter).

2 x heated (28 watt) 3 way solenoid (fuel change over) valves.

22litre plastic fuel tank with inbuilt sight guage. 0.5mx10mm rubber and 7.5mx10mm translucent fuel hoses, 8 Reinforcement ferrules . In line fuel filter. 1m x13mm heater hose,

2 x hose adaptors either19x13mm,16x13mm or 13x13mm and 18 various size hose clips.

Tank strap fixing screws and washers.500x25x3mm aluminium bar for mounts.

Priced from £410 without Coil heat exchanger, £430 with, + £15 p&p

Fitting from £300

 

SUITABILITY

Suitable for Vehicles that return less than 30 mpg , eg. MPV's, SUV's, 4x4, small trucks (over 3 litre), which have 10mm inside diameter fuel lines. Engines that are either Pre chamber or direct injection (Tdi) with distributor type/inline injection pumps. Ideally suited to Bosch, Diesel kiki, Nippon Denso or Zexel injection pumps.